Care of the environment

Button-enquiry Energy efficiency
Onefifty_walkersele_ultraglide_1_

The energy efficiency of industry worldwide is enhanced by the use of lower friction sealing products such as our Walkersele® Ultraglide rotary lip seals, Supagraf® expanded graphite and PTFE-based gland packings, and high-efficierncy hydraulic seals with instant response to pressure variations.

Long-term energy efficiency also derives from reduced fluid leakage created by our improvements in sealing technology, as energy-expensive products are no longer lost so readily as fugitive emissions or spills.

Featured Products

Fluograf Featured

Fluograf®

An outstanding pump packing

  • Highly versatile packing of 100% GORE® GFO® yarn.
  • Approved for potable water.
  • Extended service life - by up to 400% in harsh environments.
  • Maximum shaft speed: 22m/s.
  • Also suitable for valves and reciprocating pumps. 
Hornet Featured

Hornet

Long life with off-centre shafts and abrasive media

  • Aramid at corners, PTFE/graphite in body, over an elastomeric core.
  • Absorbs eccentric action of worn shafts/bearings.
  • Approved for potable water.
  • Maximum shaft speed: 20m/s.
  • Also suitable for valves and reciprocating pumps.
Onefifty_lionsele_p_200x200_ Featured

Lionsele® P - for pistons

High performance double-acting seal

  • Compact seal with low levels of dynamic and breakout friction.
  • Instant response to pressure plus low power consumption.
  • Maximum operating pressure: 40MPa.
  • Maximum surface speed: 5m/s.
Onefifty_lofilm_hd_with_fabric_gland_ring_200x200_ Featured

Lofilm® HD - for rams, rods & glands

Heavy duty for forging and extrusion presses

  • Very robust and well proven packing.
  • Instant sealing response under all loads.
  • High integrity sealing against worn surfaces.
  • Split seals provide major downtime savings.
  • Maximum operating pressure: 62MPa.
Supagraf_control Featured

Supagraf® Control

Long-term sealing plus fugitive emission control

  • High integrity sealing with low-friction for control valves.
  • Reduces fugitive emissions to below 50ppm to help industry meet EU IPPC Directive.
  • TA Luft and ISO 15848-1 certified in valves.
  • Long-term adjustment-free operation - over 100,000 valve strokes.
  • Maximum system pressure: 25MPa.
Onefifty_supagraf_premier_rings_length_200x200 Featured

Supagraf® Premier

World-beating fugitive emission control

  • Independently certified to TA Luft requirements.
  • Fugitive emission control to well below 100ppm.
  • Top of its class in independent tests run on behalf of CAPI Group (Akzo Nobel, Shell, Dow and DSM).
  • Low friction on rotary and rising stem valves.
  • Maximum system pressure: 25MPa.
Onefifty_walkersele_ultraglide-crop300 Featured

Walkersele® Ultraglide

Ultraglide reformulated-HNBR elastomer

  • For high speeds in abrasive environments.
  • Highly extended sealing life with many fluid media.
  • Low friction material for improved running.
  • Improved heat dissipation for high efficiency sealing.

Full Product Range

Fluograf

Fluograf®

An outstanding pump packing

  • Highly versatile packing of 100% GORE® GFO® yarn.
  • Approved for potable water.
  • Extended service life - by up to 400% in harsh environments.
  • Maximum shaft speed: 22m/s.
  • Also suitable for valves and reciprocating pumps. 
Fluolion_emulsion_xa-p

Fluolion® Emulsion XA-P

High performance packing for chemical duties

  • Universal packing of a unique synthetic yarn, cross-plaited over an elastomeric core.
  • Excellent choice for hot, abrasive, caustic media.
  • Maximum shaft speed: 20m/s.
  • Also suitable for valves and reciprocating pumps.
Hornet

Hornet

Long life with off-centre shafts and abrasive media

  • Aramid at corners, PTFE/graphite in body, over an elastomeric core.
  • Absorbs eccentric action of worn shafts/bearings.
  • Approved for potable water.
  • Maximum shaft speed: 20m/s.
  • Also suitable for valves and reciprocating pumps.
Onefifty_lionsele_g_200x200_

Lionsele® G - for rods & glands

High performance single-acting seal

  • Compact seal with very smooth operation.
  • Low dynamic and breakout friction.
  • Maximum operating pressure: 40MPa.
  • Maximum surface speed: 5m/s.
Onefifty_lionsele_p_200x200_

Lionsele® P - for pistons

High performance double-acting seal

  • Compact seal with low levels of dynamic and breakout friction.
  • Instant response to pressure plus low power consumption.
  • Maximum operating pressure: 40MPa.
  • Maximum surface speed: 5m/s.
Onefifty_lofilm_hd_with_fabric_gland_ring_200x200_

Lofilm® HD - for rams, rods & glands

Heavy duty for forging and extrusion presses

  • Very robust and well proven packing.
  • Instant sealing response under all loads.
  • High integrity sealing against worn surfaces.
  • Split seals provide major downtime savings.
  • Maximum operating pressure: 62MPa.
Supagraf_control

Supagraf® Control

Long-term sealing plus fugitive emission control

  • High integrity sealing with low-friction for control valves.
  • Reduces fugitive emissions to below 50ppm to help industry meet EU IPPC Directive.
  • TA Luft and ISO 15848-1 certified in valves.
  • Long-term adjustment-free operation - over 100,000 valve strokes.
  • Maximum system pressure: 25MPa.
Supagraf_lf_rings

Supagraf® LF Rings

Low friction plus fugitive emission control

  • Moulded rings of expanded graphite with special low-friction coating.
  • Fugitive emission control to 50ppm or better.
  • Retains low-friction with emission control for 60,000+ valve cycles.
  • Maximum service pressure: 25MPa.
Supagraf_moulded_rings

Supagraf® Moulded Rings

Rotary sealing at very high temperatures

  • Graphite foil preformed into endless or split rings.
  • Approved for potable water applications.
  • Highest purity Nuclear Grade also available.
  • Outstanding temperature and chemical capabilities.
  • Also recommended for valve stem duties.
Onefifty_supagraf_premier_rings_length_200x200

Supagraf® Premier

World-beating fugitive emission control

  • Independently certified to TA Luft requirements.
  • Fugitive emission control to well below 100ppm.
  • Top of its class in independent tests run on behalf of CAPI Group (Akzo Nobel, Shell, Dow and DSM).
  • Low friction on rotary and rising stem valves.
  • Maximum system pressure: 25MPa.
Onefifty_walkersele_ultraglide-crop300

Walkersele® Ultraglide

Ultraglide reformulated-HNBR elastomer

  • For high speeds in abrasive environments.
  • Highly extended sealing life with many fluid media.
  • Low friction material for improved running.
  • Improved heat dissipation for high efficiency sealing.
Product Assistant
James-walker-logo

a www.embado.com solution

© All content copyright of James Walker 2012

an embado solution

© 2012 All contents copyright of James Walker 2012.

LOGIN | LEGAL | CONTACT US | INTRANET | FEEDBACK |